Bryza PVC guttering systems

Bryza PVC guttering systems

· Roof gutter – A basic component for draining rainwater from the roof

· Clamp hook – Used to fix clamps to the building wall; its length should be adjusted to the thickness of the insulation

· Stabilising façade collar – Complementary fixing product

· Adjustable gutter bracket – Acts as a gutter support, fitted directly to the rafters or battens

· Screw-on gutter bracket – Acts as a gutter support, fitted directly to the rafters or battens

· Straight gutter bracket – Acts as a gutter support, fitted directly to the rafters or battens

· Metal clamp – A metal bracket for securing a pipe to a building wall

· Clamp – A bracket for securing a pipe to a building wall

· Downpipe reducer – Used to connect guttering pipes to the downpipe without any problems

· Sedimentation tank – Connects the guttering system to the stormwater drainage system, preventing debris running off the roof from entering the stormwater drainage system

· Grate – Protects the stormwater drainage system from debris flowing off the roof

· Elbow (any angle) – As the gutter is set back from the wall, elbows are required. These allow the pipe run to follow the wall. They are glued at the angle specified by the customer

· Elbow – As the gutter is set back from the wall, elbows are required. These allow the pipe run to follow the wall

· Rainwater harvesting system – Enables the effective collection of rainwater

· Reducer – Used to reduce the diameter of pipes

· Downpipe connector – Used to connect pipes

· T-piece – Allows the water flowing through the drainpipe to be diverted into a tank for later use

· Downpipe – A vertical component of the system that carries water away from the gutter and ensures it is safely channelled down the building

· Left/right end cap – Designed to seal the end of the gutter, preventing water from spilling out

· Downpipe – Ensures that water is safely channelled from the gutter into the downpipe

· External corner with adjustable angle – A component used to connect gutters at the corners of a building, allowing the system to be adapted to the shape of the roof

· External corner fitting (any angle) – A component used to connect gutters at the corners of a building, allowing the system to be adapted to the shape of the roof. Cut to the angle specified by the customer

· External corner piece – A component used to connect gutters at the corners of a building, allowing the system to be adapted to the shape of the roof

· Gutter connector – Enables a secure connection between gutters and corner pieces

· Internal corner with adjustable angle – A component used to connect gutters at the corners of a building, allowing the system to be adapted to the shape of the roof

· Internal corner fitting (any angle) – A component used to connect gutters at the corners of a building, allowing the system to be adapted to the shape of the roof. Cut to the angle specified by the customer

· Gutter bracket – A component used to support gutters, mounted to the fascia board

· Cleaning brush refill – Companion product